Wireless Modules & Modems

Product Details:

HC-05 module is an easy to use Bluetooth SPP (Serial Port Protocol) module, designed for transparent wireless serial connection setup.

Serial port Bluetooth module is fully qualified Bluetooth V2.0+EDR (Enhanced Data Rate) 3Mbps Modulation with complete 2.4GHz radio transceiver and baseband. It uses CSR Bluecore 04-External single chip Bluetooth system with CMOS technology and with AFH (Adaptive Frequency Hopping Feature). It has the footprint as small as 12.7mmx27mm. Hope it will simplify your overall design/development cycle.

Features:

• Up to +4dBm RF transmit power
• PIO control
• UART interface with programmable baud rate
• With integrated antenna
• With edge connector

Additional Information:

• Item Code: HC-05

Product Details:

We are counted among the well-reputed entity for providing 434 MHz RF Transceiver Sensor Module to our esteemed patrons.

Description:
These are cheap and simple to use RF receivers and transmitters. Its extreme small size coupled with its low power consumption makes it ideal for a variety of applications. These modules can be used with an encoder/decoder IC pair or can be directly interfaced to a microcontroller/Arduino.

This 434MHz Transmitter is an ASK Hybrid transmitter module. It uses saw resonator for frequency stability. The receiver is an ASK super heterodyne receiver with PLL synthesizer and crystal oscillator.

Product Details:

This GSM Modem can accept any GSM network operator SIM card and act just like a mobile phone with its own unique phone number. Advantage of using this modem will be that you can use its RS232 port to communicate and develop embedded applications. Applications like SMS Control, data transfer, remote control and logging can be developed easily.

The modem can either be connected to PC serial port directly or to any microcontroller through MAX232. It can be used to send and receive SMS or make/receive voice calls. It can also be used in GPRS mode to connect to internet and do many applications for data logging and control. In GPRS mode you can also connect to any remote FTP server and upload files for data logging.

This GSM modem is a highly flexible plug and play quad band SIM900A GSM modem for direct and easy integration to RS232 applications. Supports features like Voice, SMS, Data/Fax, GPRS and integrated TCP/IP stack.

Features:

• Built in RS232 Level Converter (MAX3232)
• Configurable baud rate
• SMA connector with GSM L Type Antenna.
• Built in SIM Card holder.
• Built in Network Status LED
• Inbuilt Powerful TCP/IP protocol stack for internet data transfer over GPRS.
• Audio interface Connector
• Most Status & Controlling Pins are available at Connector

Product Details:

With the help of our expert team members, we have been able to offer a wide range of RFID Card.

Product Details:

We are the leading firm, actively involved in providing a wide series of 433 MHz RF Sensor Module Pair.

Description:

It is a effective low cost solution for using 433 MHz. The TX-ASK is an ASK hybrid transmitter module. TX-ASK is designed by the saw resonator, with an effective low cost, small size and simple to use for designing.

Product Details:

Description:
This is the XBee XB24-Z7WIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.

These are essentially the same hardware as the older Series 2.5, but have updated firmware. They will work with Series 2.5 modules if you update the firmware through X-CTU.

Product Details:

Decodes DTMF audio signal to 4 bit binary TTL level output with LED indication. Suitable for use with microcontroller applications.

Connect regulated +5V DC supply for operation of board. Outputs Q1-4 and VT are active high output at 5V level. If any LED is on means that output is at high level. VT LED blinks once a new DTMF tone is received. The binary data appears at Q1 to Q4. Details of this output is on next page. Input signal can be from an audio source like microphone amplifier, FM radio receiver, wired phone line. Please note when connecting land line phone signal, do not connect ground wire of board to phone line directly. Use a 100nF capacitor in series to phone line wires at ground.

Features:

• Decodes DTMF as 4 bit binary
• TTL level output for direct connection to microcontrollers
• Low power 5V DC operation
• LED indication of outputs
• Simple to use
• Based on excellent MT8870 IC

Product Details:

Description:

The NEO-6 module series is a family of stand-alone GPS receivers featuring the high performance u-blox 6 positioning engine. Their compact architecture and power and memory options make NEO-6 modules ideal for battery operated mobile devices with very strict cost and space constraints.

 

The 50-channel u-blox 6 positioning engine boasts a Time-To-First-Fix (TTFF) of under 1 second. The dedicated acquisition engine, with 2 million correlators, is capable of massive parallel time/frequency space searches, enabling it to find satellites instantly. Innovative design and technology suppresses jamming sources and mitigates multipath effects, giving NEO-6 GPS receivers excellent navigation performance even in the most challenging environments.

Product Details:

We are offering ESP8266 WIFI Sensor Module to our customers.